SparkFun Thermocouple Type-K - Stainless Steel Temperature Hubs/Clamps 24mm diameter

24mm diameter

Multiple modes: Analog Input

you will need an external 16MHz crystal or resonator

The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor

Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5

SparkFun Thermocouple Type-K - Stainless Steel Temperature Hubs/Clamps 24mm diameterThis is a stainless steel, Type K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a hot end and a cold one). Once this is achieved, a voltage potential is formed and current flows. One junction is held in the environment where the temperature of interest exists, this is known as the hot junction. The other junction,