FS Tool 3/8 x 1 Inch XLC-Coated Finishing Down-Cut Spiral Router Bit RSF2014XLC-D2 rtype_V-Groove This chisel with jig self-aligns

This chisel with jig self-aligns to square up the rounded corners that result from routing hinge mortises for a perfect

T-20 x 137mm

Use a router with 45 degree chamfer bit to produce the perfect chamfer (TSO does not recommend the UJK Chamfer tool for this procedure)

50x 80-grit Abranet 3x4 inch sheets

0 Ah Li-HighPower battery pack can be charged in just 27 minutes

FS Tool 3/8 x 1 Inch XLC-Coated Finishing Down-Cut Spiral Router Bit RSF2014XLC-D2 rtype_V-Groove This chisel with jig self-alignsFS Tools finishing down cut spiral router bits are ideal for CNC routers, producing exceptionally smooth cuts without any chipping, fuzz, or tear out on the top surface. In addition, the downwards cutting action helps hold down material, reducing the chances of parts moving while machining with a CNC router and counteracting flex in thin materials. Each bit is made of special submicron, extended life carbide, then the flutes are precision ground and