Duratec® Clear Hi-Gloss Gel Coat Additive resin-traps-feed-lines consistent surface finish for your

consistent surface finish for your laminate once the bagging process is complete

reducing cycle time and labor

Square apperature within weave is approximately 2

If a puncture in the finished product does occur

Coarse grit tools are especially useful for cleaning up the edges after other tools have been used to make larger cuts

Duratec® Clear Hi-Gloss Gel Coat Additive resin-traps-feed-lines consistent surface finish for yourDuratec Clear High Gloss Additive can be blended with numerous gel coats to create a glossy, smooth finished surface. Mix at a 1: 1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open air cure. It can also be blended at 15% with tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion. The reduction in viscosity allows gel coats