FITTING, WELD CONNECTOR, OPTIONAL, FOR MECH. TEMP. GAUGE Rhodesian Chest Rig They should be replaced every

They should be replaced every time the throttle body has undergone any replacement

This handy tool easily attaches to the oil pump drive lug splines

It has a 9" deep by 7" long by 11" wide rear sump and a 7 qt

Maximum increases on the dyno revealed +13 hp and +15 lb-ft at the rear wheels

hardware and detailed instructions

FITTING, WELD CONNECTOR, OPTIONAL, FOR MECH. TEMP. GAUGE Rhodesian Chest Rig They should be replaced everySteel adapter with 5 8" 18UNF thread and flange for direct seal with AutoMeter mechanical oil and transmission temperature gauge probe sealing nuts. For installing AutoMeter Mechanical temperature gauge probes on applications that do not allow for drill and tap method.