MHC 638-7754 Combination Set 300mm/12", Centre head, Protractor and 12" rule, Graduation: 0.5mm and 1/32" on front face, 1mm and 1/64" on back face, Normal type blades cannot rotate 360 deg Wire / Rope / Yarn / Tubing Environmental conditions: 0°C to 50°C

Environmental conditions: 0°C to 50°C (20% to 80% rel

DP1-VR/-VA to KA-Counter

00005” / 0

This vernier height gauge offers you the following benefits:

Offset lug back for series 2 Indicator 6

MHC 638-7754 Combination Set 300mm/12", Centre head, Protractor and 12" rule, Graduation: 0.5mm and 1/32" on front face, 1mm and 1/64" on back face, Normal type blades cannot rotate 360 deg Wire / Rope / Yarn / Tubing Environmental conditions: 0°C to 50°CNormal type blades cannot rotate 360 deg Center head: To locate center of cylinder with diameter (d): 30 100mm Accuracy: 0. 15mm Protractor head: To set the blade at desired angle to an edge of a workpiece, and can be used to measure angles Range: 0 180 Accuracy: 7min. Square head: To set the blade at 90 or 45 to an edge of a workpiece Accuracy: 8min for 90 square, 10min for 45 square Blade: Range: 300mm 12", Graduation: 0. 5mm and 1 32" on front