Dani Fusion 2.0 Artemis (Regular and Stabwood) Version:Artemis - Stabwood Stem Yellow / Second lowest -

Yellow / Second lowest - 330f after preheat

with each stand being irreplicable

Temperatures are very reliable though they do run around 5-10C hot as the temp measurement is taken from the glass on the outside of the banger which is not directly connected to the heated ferrous metal part inside the banger

It comes with some key improvements which were all heavily requested

if you double up the mesh screens then break up the material small but not too finely and place some on the top screen it's pretty effective

Dani Fusion 2.0 Artemis (Regular and Stabwood) Version:Artemis - Stabwood Stem Yellow / Second lowest -In case you missed it the new Dani Punch First Edition has arrived in stock, you may want to check this out! The Dani Fusion 2. 0 Artemis is similar to the Dani Fusion 2. 0 metal stem, except with the addition of a Vietnamese Tracwood Sleeve around the metal sleeve of the stem. This helps to reduce the heat which is transferred into your fingers while holding the device. This does make for slightly reduced heat transferred away from the vapor as it