Black Swaged Rod 16.5" x 7/16" Thread rear end The bolt circle is 5-1/4"

The bolt circle is 5-1/4" and it has holes for 1/4" bolts which can easily be drilled out to 5/16" if you so desire

Hyper Racing # 04-1425

This bolt is used on the X6 chassis through the rear panhard sleeve to bolt the rear panhard bar in place and to mount the adjuster rod for the remote adjuster

Features double shear towers for superior strength and 2

Drill out your sprocket bolt holes to 5/16" using a P drill bit size

Black Swaged Rod 16.5" x 7/16" Thread rear end The bolt circle is 5-1/4"Hyper Racing # 03 165B Standard size rod for the front panhard. Rods are 3 4" O. D., 6061 T 6 swaged aluminum. First two digits signify thread. 02 = 3 8" thread. 03 = 7 16" thread. Last 3 4 digits indicate length, 125 = 12 1 2" long, 1225 = 12. 25" (12 1 4") long. HYPER RACINGS GOLD STANDARD: Components marked with the gold H Mark logo are part of Hyper Racings Gold Standard lineup, recommended for X4X7 600cc Micro Sprint Chassis. Each one is tested