West System 410 Microlight Filler - 5oz splinter guard Access to the sanding drum

Access to the sanding drum is extremely convenient—simply lift up on the handle and you're ready to change out your sanding wrap

The ideal working range is from 1/8" to 1" thick

A top coat (such as General Finishes High Performance Water-Based Top Coat)

You can also upgrade to a Dust Collection Blade Guard and step up to SawStop’s advanced dust collection above the table

The saw is also locked into a position to facilitate easy arbor bolt removal

West System 410 Microlight Filler - 5oz splinter guard Access to the sanding drum410 Microlight is the ideal low density filler. Blended with epoxy, it creates a light and easily worked epoxy fairing compound. Microlight is formulated to mix into epoxy more easily than typical fairing filler. After it cures, it is about 30% easier to sand than most other epoxy based fairing compounds. Avoid settling dust collection and airborne dust formation. Avoid direct heat or excessive sunlight. Do not mix with polyester or vinyl ester